Product Overview  >  Rotary Switches

 1800 Series Information Packet Includes:
  • Description
  • Product Photos
  • Engineering Drawings
  • Ordering Information
  • Technical Data
  • Information on all 1800 Series Switches
  • 1800 standard
  • 1800 pull/push
  • 1800 Isolated Position Switch Description
  • 1800 spring return
  • Configurations and Restrictions Table
  • 1800 condensed
  • Commercial C1800
  • M1800 Series

DOWNLOAD THE PDF
Cole 1800 Series Information Packet
s1800.pdf

20 pages, 4.4MB
Adobe Acrobat format

Download time at 28.8KBs: 17minutes

Standard Commercial Half Inch Enclosed Rotary Switch

Cole's Series C1800 Style Rotary Switch is made to provide the mechanical and electrical reliability for instrumentation, medical equipment, aircraft, computers, industrial controls, communication, ordnance, as well as ground support electronic equipment, etc.

The C1800 Series switch is designed with the same specifications and dimensions as our M1800 switch and offers the same level of performance, but COLE can provide the C1800 at a lower price by using the latest, state-of-the-art materials. The C1800 switch is perfect for high and low level switching, and meets or exceeds the requirements of MIL-S-3786 and has been tested per MIL-STD-202 as follows:

  • THERMAL SHOCK PER MIL-STD-202; METHOD 107, TEST CONDITION "B"
  • VIBRATION PER MIL-STD-202; METHOD 204, TEST CONDITION "B"
  • MEDIUM SHOCK PER MIL-STD-202; METHOD 213
  • HIGH SHOCK PER MIL-STD-202; METHOD 207
  • MOISTURE RESISTANCE PER MIL-STD-202; METHOD 106
  • EXPLOSION PROOF PER MIL-STD-202; METHOD 109
  • SALT SPRAY PER MIL-STD-202; METHOD 101, CONDITION "B"

The switches are available with 36, 45, 60, and 90 degree indexing with one or two poles (see Circuit Diagram). They include fixed and adjustable stops, sealed and unsealed styles, PC or solder lug terminals, RFI & EMI protection, and a .125" or .250" dia. shaft. The shafts are provided with either a single flat or a screwdriver slot, and are made from brass or stainless steel.

Unique design construction features include: all terminals on the rear, self-cleaning contacts for low level switching, and low contact resistance through the life of the switch (25,000 cycles min.). The detent mechanism provides smooth positive detent action and a mechanical life in excess of 50,000 cycles. In the C1800, the terminals and commons are molded in thermoset plastic and sealed with a special process to eliminate flux contaminants from seeping inside the switch during wave soldering and cleaning.

The C1800 switch is built in a clean-room atmosphere, as are all COLE products, to prevent contamination during assembly.

These and many other features will provide the ultimate in mechanical and electrical reliability, during the life of the switch.

C1800 SERIES TECHNICAL DATA

Continuous (Non-Switching)
Current Capacity
6 Amps
Switching Current Capacity
28 VDC Resistive
0.2 Amps
Switching Current Capacity
115 VAC Resistive
0.15 Amps
Switching Current Capacity
28 VDC Inductive (2.8 H.)
0.03 Amps
Switching Current Capacity
28 VDC Lamp Load
0.1 Amps
Low Level Capable
YES
Switching Life
25,000 cycles
Weight
13 grams

 

Contact Surfaces Gold Plated
Vibration Tested YES
High Impact Shock Tested YES
Moisture Resistant YES
Salt Spray Resistant YES
Explosion Proof YES
Immersion Tested YES
RFI/EMI Tested YES
Screwdriver Slot Available
Shaft Seal Available
Panel Seal Available

 

Degrees Max. Positions Poles Available
36° 10 1 or 2
45° 8 1 or 2
60° 6 1 or 2
90° 4 1 or 2

 

 
About Cole l Products l Applications l Contact l Request a QuoteHome
 
 



© 2015 Cole Instrument Corporation.  All rights reserved